Smiths Medical Heat and Moisture Exchanger 30 mg at 34 degree C for 500 mL Tidal Volume, 27 mg at 34 degree C for 1000 mL Tidal Volume 1 hPa at .5 L per Second, 3 hPa at 1 L per Second, 5 hPa at 1.5 L per Second, 20 EA/CS

Heat and Moisture Exchanger 30 mg at 34 degree C for 500 mL Tidal Volume, 27 mg at 34 degree C for 1000 mL Tidal Volume 1 hPa at .5 L per Second, 3 hPa at 1 L per Second, 5 hPa at 1.5 L per Second, 20 EA/CS

This heat and moisture exchanger with flex tube helps provide passive humidification between the patient and circuit. It may be a fit for anesthesia or ICU settings where buyers want easier connection to an endotracheal tube. The unit uses treated open-cell foam media and has 16 mm I.D. x 22 mm O.D. connection ports on the patient end with a 15 mm O.D. circuit end.

Good Fit For

• Anesthesia settings
• ICU respiratory care
• Setups requiring easier connection to an endotracheal tube

Key Features

• Passive humidification between patient and circuit for respiratory care workflows
• Flex tube supports easier connection to an endotracheal tube
• Suitable for anesthesia or ICU use
• Treated open-cell foam media
• Patient-end connection ports: 16 mm I.D. x 22 mm O.D.; circuit end: 15 mm O.D.
• Dead space of 70 mL for buyers reviewing ventilation setup details

Applications and Usage

• Passive humidification between a patient and breathing circuit
• Anesthesia breathing circuit setups
• ICU ventilation workflows involving an endotracheal tube

Packaging and Handling

• Packaging: CS.
• Size: 16 mm.
• Material: Foam.
• Sterility: Sterile.
• Check connection port sizes against your patient-end and circuit-end requirements before ordering.
• Review dead space and resistance values as part of ventilator circuit selection.
• This item is non-sterile.

FAQ

• Where can this heat and moisture exchanger be used? This heat and moisture exchanger can be used in anesthesia or ICU settings.
• Does this model include a flex tube? Yes. This heat and moisture exchanger includes a flex tube for easier connection to an endotracheal tube.
• What are the connection sizes? The patient end has 16 mm I.D. x 22 mm O.D. connection ports, and the circuit end is 15 mm O.D.
• What media type does this heat and moisture exchanger use? It uses treated open-cell foam media.
• What performance details are provided? Moisture output is 30 mg at 34 degree C for 500 mL tidal volume and 27 mg at 34 degree C for 1000 mL tidal volume. Resistance is 1 hPa at .5 L per second, 3 hPa at 1 L per second, and 5 hPa at 1.5 L per second.

From Smiths Medical.