Patterson Medical Splinting Material Rolyan® Ezeform™ Solid 3/32 X 18 X 24 Inch Thermoplastic White, 1/EA

Splinting Material Rolyan® Ezeform™ Solid 3/32 X 18 X 24 Inch Thermoplastic White, 1/EA

Rolyan Ezeform splinting material is a solid thermoplastic sheet used to fabricate custom-molded rigid splints. It fits therapy and clinical settings where a material needs to hold shape during contouring while still draping and conforming well. This white sheet measures 18 x 24 inch and heats to a workable state at 150 to 170 degrees F in 30 seconds to 2 minutes.

Good Fit For

• Custom rigid splint fabrication
• Therapy and rehabilitation settings
• Cases involving joint pain or irritation

Key Features

• Solid thermoplastic sheet for fabrication of custom-molded rigid splints
• Maximum resistance to stretch helps maintain shape during molding
• Great draping and conforming qualities support detailed contouring
• Slightly tacky surface helps hold the material in place during fabrication
• Edges trim and rub smooth easily for cleaner finishing
• Heat activated at 150 to 170 degrees F with a 2 to 3 minute working time

Applications and Usage

• Forming custom rigid splints for individual patient needs
• Molding critical contours where the material needs to stay in place
• Trimming and finishing splints with smooth edges after shaping

Packaging and Handling

• Packaging: EA.
• Size: 18 X 24 Inch.
• Material: Plastic.
• This material is heat activated between 150 and 170 degrees F.
• Working time is 2 to 3 minutes after heating, so preparation should be ready before molding.
• The sheet has maximum resistance to stretch, which may matter when selecting a material for rigid splint designs.

FAQ

• What kind of splints is this material intended for? This splinting material is used for fabrication of custom-molded rigid splints.
• How quickly does the thermoplastic become workable? The sheet is heat activated at 150 to 170 degrees F and becomes ready in about 30 seconds to 2 minutes.
• How much working time do I have after heating? Rolyan Ezeform splinting material gives a working time of 2 to 3 minutes.
• Does the material stay in place while shaping contours? Yes. The slightly tacky surface helps the material stay in place while critical contours are molded.
• What size is this sheet? This sheet measures 18 x 24 inch.

From Rolyan Ezeform by Patterson Medical.