Performance Health Splinting Material Rolyan® Aquaplast-T™ Watercolors™ 19% OptiPerf 1/8 X 18 X 24 Inch Thermoplastic Charcoal

Splinting Material Rolyan® Aquaplast-T™ Watercolors™ 19% OptiPerf 1/8 X 18 X 24 Inch Thermoplastic Charcoal

Rolyan Aquaplast-T Watercolors splinting material is a thermoplastic sheet for custom splint fabrication. It fits therapy and clinical settings that need a material with ventilation, reheating flexibility, and precise molding during adjustments. This charcoal sheet measures 1/8 x 18 x 24 inch and uses a 19% OptiPerf perforation pattern.

Good Fit For

• Custom splint fabrication in therapy settings
• Splint revisions that may require reheating and remolding
• Applications where ventilation and comfort matter
• Workflows that benefit from easy trimming and edge finishing

Key Features

• 19% OptiPerf perforation pattern supports ventilation while maintaining material strength
• 100% memory allows repeated reheating for splint revisions without compromising structure
• Heated material can be temporarily bonded by pinching surfaces together
• Becomes clear when heated to help with precise application
• Edges trim easily for cleaner finishing
• Warm-water activation takes about 35 seconds with 1 to 2 minutes of working time

Applications and Usage

• Forming custom thermoplastic splints from a full-size sheet
• Reheating and adjusting a splint during follow-up fitting
• Creating splints where perforation helps improve airflow
• Trimming and finishing edges after molding

Packaging and Handling

• Packaging: EA.
• Size: 18 X 24 Inch.
• Material: Plastic.
• For a permanent bond, remove the coating with a liquid remover or scrape or sand the surface before bonding.
• Working time is limited to about 1 to 2 minutes after heating, so setup should be ready before activation.
• The sheet becomes clear when heated, which can help during placement and shaping.

FAQ

• Can this splinting material be reheated and adjusted? Yes. The material has 100% memory, so it can be reheated for splint revisions without compromising its structure.
• How is the material activated for molding? Heat the sheet in warm water for about 35 seconds. That gives roughly 1 to 2 minutes of working time for shaping.
• Does the sheet have perforations? Yes. This sheet uses a 19% OptiPerf perforation pattern that helps with ventilation while maintaining strength.
• Can the heated surfaces be bonded together? Yes. Heated surfaces can be temporarily bonded by pinching them together. For a permanent bond, the coating needs to be removed first.
• What size is this sheet? This splinting sheet measures 1/8 x 18 x 24 inch.

From Rolyan Aquaplast-T Watercolors by Performance Health.