McKesson Horizontal Spin Centrifuge 6 Place Horizontal Rotor Fixed speed at 3,500 RPM and G-Force (RCF) at 1777xG

Horizontal Spin Centrifuge 6 Place Horizontal Rotor Fixed speed at 3,500 RPM and G-Force (RCF) at 1777xG

This horizontal spin centrifuge is a benchtop unit with a 6-place horizontal rotor for standard 2 to 12 mL tubes. It fits labs and clinical settings that need straightforward separation with glove-friendly controls, quiet operation, and built-in safety protection. Fixed speed runs at 3,500 RPM with 1777xG, and the timer can be set from 1 to 99 minutes with an end-of-run beep.

Good Fit For

• Benchtop centrifuge needs in labs and clinical work areas
• Workflows using standard 2 to 12 mL tubes
• Repeat timed runs where saved timer settings can speed setup
• Settings that value quieter operation from a brushless AC motor

Key Features

• 6-place horizontal rotor supports standard 2 to 12 mL tubes for routine tube processing
• Fixed speed of 3,500 RPM at 1777xG helps keep operation simple and consistent
• Push button keypad is easy to use while wearing gloves
• Electronic 1 to 99 minute timer includes a beep at the end of the run
• Memorizes the last time setting after power-off to streamline repeat runs
• Zero RPM lid latch protection and lid-closed operation add an important safety safeguard

Applications and Usage

• Separating samples in standard 2 to 12 mL tubes
• Running timed centrifuge cycles from 1 to 99 minutes
• Processing up to six tubes at a time on a benchtop
• Using shorter setup steps for repeat runs with memorized timer settings

Packaging and Handling

• Packaging: EA.
• Size: 100mm.
• Optional adapters are required for tubes less than 100mm in length
• The rotor is intended for standard 2 to 12 mL tubes
• This model runs at a fixed speed rather than variable speed
• The lid stays locked until spinning stops, which affects access between runs

FAQ

• What tube sizes does this centrifuge accept? This centrifuge works with standard 2 to 12 mL tubes in its 6-place horizontal rotor.
• Do shorter tubes need adapters? Yes. Optional adapters are required for tubes less than 100mm in length.
• Can the speed be adjusted? No. This centrifuge runs at a fixed speed of 3,500 RPM with 1777xG.
• Does it have a timer? Yes. The electronic timer can be set from 1 to 99 minutes and gives a beep when the run ends.
• What safety features are included? The zero RPM lid latch protection prevents the lid from opening until the unit stops spinning, and the centrifuge will not run unless the lid is properly closed.

From McKesson.