McKesson Heat and Moisture Exchanger with Filter 28.4 mg H2O / L @ VT 500 mL 2.29 cm H20 @ 30 LPM, 0.25 cm H20@ 8 LPM, 1/PK

Heat and Moisture Exchanger with Filter 28.4 mg H2O / L @ VT 500 mL 2.29 cm H20 @ 30 LPM, 0.25 cm H20@ 8 LPM, 1/PK

This heat and moisture exchanger with filter is a hygroscopic airway humidification device with an angled inlet and CO2 sampling port. It fits short-term breathing system use where buyers want moisture retention, filtration, and secure gas sampling access in ventilator or anesthesia circuits. This single-pack unit supports tidal volumes from 150 mL to 1000 mL and offers bacterial and viral filtration efficiency above 99.9%.

Good Fit For

• Short-term airway humidification in ventilator circuits
• Anesthesia breathing circuits that need filtration and gas sampling access
• Single-patient respiratory workflows in clinical settings
• Setups covering tidal volumes from 150 mL to 1000 mL

Key Features

• Angled inlet helps eliminate the need for a gas sampling elbow, which can simplify breathing circuit setup
• CO2 sampling port with luer gas sampling ports gives convenient, secure access to airway gases
• Hygroscopic filter delivers 28.4 mg H2O/L at VT 500 mL for short-term airway humidification
• Bacterial and viral filtration efficiencies exceed 99.9%, supporting breathing system contamination control
• Low airflow resistance helps minimize work of breathing while maintaining moisture retention
• Clear housing makes it easier to view humidification levels during use

Applications and Usage

• Adding heat and moisture retention to a ventilator breathing system
• Supporting filtration in an anesthesia circuit
• Connecting end tidal CO2 gas sampling in a breathing setup
• Using one HMEF across a broad 150 mL to 1000 mL tidal volume range
• Short-term single-patient respiratory circuit management

Packaging and Handling

• Packaging: PK.
• Size: 2.29 cm.
• Sterility: Sterile.
• This product is intended for short-term airway humidification
• The unit is for single patient use
• Connection type is 22 mm O.D. / 15 I.D. x 15 O.D. mm port, so connection fit should be confirmed before ordering
• This item is not made with natural rubber latex

FAQ

• What kind of breathing systems can this heat and moisture exchanger with filter be used with? This heat and moisture exchanger with filter is intended to enhance breathing systems such as ventilators and anesthesia circuits.
• Does this unit include a CO2 sampling port? Yes. The device has an end tidal CO2 sampling port and luer gas sampling ports for secure gas sampling connections.
• What tidal volume range does this HMEF support? The mini design supports tidal volumes from 150 mL to 1000 mL.
• Is this heat and moisture exchanger sterile or latex free? The product is latex free. Sterility should be reviewed from the structured facts on this page when matching your facility requirements.
• How effective is the filtration? Bacterial filtration efficiency and viral filtration efficiency are both 99.90%.

From McKesson.