Drive Medical Med Aire Alternating Pressure Pump and Pad System, Fixed Pressure

Med Aire Alternating Pressure Pump and Pad System, Fixed Pressure

The Med Aire alternating pressure pump and pad system is a fixed-pressure mattress overlay system with a pump and vinyl bubble pad. It is intended for prevention, treatment, and management of pressure ulcers in bed settings where alternating pressure support is needed. This version uses 130 individual bubble cells, a 4 LPM pump, and a 5 minute cycle time, with a 300 lb. weight capacity.

Good Fit For

• Bed-based pressure ulcer management
• Facilities needing a fixed-pressure alternating pad system
• Users requiring support up to 300 lbs.

Key Features

• Alternating pressure pump and pad system for prevention, treatment, and management of pressure ulcers
• 130 individual bubble cells alternate inflation and deflation to vary pressure points over time
• Fixed pressure pump maintains uniform firmness across the air cells during the cycle
• 4 LPM pump with a 5 minute cycle time supports consistent airflow and pressure
• Heavy gauge premium vinyl bubble pad adds durability for repeated bed use
• Built-in pump bracket helps mount the pump to the bed for easier setup

Applications and Usage

• Adding an alternating pressure pad system to a bed for pressure ulcer care
• Supporting prevention and management workflows for pressure relief
• Using a pump-mounted bed setup where quiet operation is preferred

Packaging and Handling

• Packaging: EA.
• Basic assembly is required before use.
• The pad measures 78 inch x 36 inch with a 2-1/2 inch height, so buyers should confirm bed fit.
• The system has a 300 lb. weight capacity.
• The pump uses fixed pressure rather than an adjustable pressure setting.

FAQ

• What type of pressure support does this system provide? This system provides alternating pressure with a fixed-pressure pump. The air cells alternately inflate and deflate to vary pressure over time.
• How does the pad alternate pressure? The bubble pad uses 130 individual bubble cells. The pump alternates which cells are inflated or deflated every 5 minutes.
• What size bed area does the pad cover? The pad measures 78 inch long by 36 inch wide and is 2-1/2 inch high. Check those dimensions against the bed before ordering.
• What is the weight capacity? This system is rated for up to 300 lbs.
• Does this system require installation? No installation is required, but basic assembly is required. A built-in bracket allows the pump to be mounted to the bed.

From Drive Medical.