Vyaire Medical HME with Filter 27 mg, H2O/l (VT =750 ml) 0.06 kPa (0.6 cm H2O) at 30 LPM

HME with Filter 27 mg, H2O/l (VT =750 ml) 0.06 kPa (0.6 cm H2O) at 30 LPM

This HME with filter is a heat and moisture exchange filter for respiratory care workflows that call for moisture output and filtration in a compact format. It can fit ICU and OR settings where buyers need a defined change schedule and clear connection sizes for setup. Key specs include 27 mg H2O/l moisture output at VT 750 ml, 0.06 kPa resistance at 30 LPM, and 15 mm/22 mm connection ports.

Good Fit For

• ICU respiratory care setups
• Operating room patient use
• Workflows that require defined 15 mm and 22 mm connections
• Buyers matching moisture output and resistance specifications

Key Features

• HME with filter format supports respiratory care applications where humidification and filtration are both needed
• 27 mg H2O/l moisture output at VT 750 ml helps buyers match the device to specified performance needs
• 0.06 kPa 0.6 cm H2O resistance at 30 LPM supports low-resistance airflow requirements
• 15 mm F/22 mm M and 15 mm M/22 mm F connection ports give clear sizing for circuit fit
• 99.999% bacterial removal and 99.998% viral removal provide defined filtration performance
• 17 gram weight and 34 mL dead space add useful selection details for respiratory setup decisions

Applications and Usage

• Selecting an HME filter for ICU use with a 24 hour change schedule
• Using a fresh HME filter for each patient in the OR
• Matching respiratory circuit connections that use 15 mm and 22 mm port sizes
• Choosing a filter based on specified bacterial and viral removal performance

Packaging and Handling

• Packaging: EA.
• Size: 0.6 cm.
• Change frequency is every 24 hours in ICU use
• For OR use, change after every patient
• Check the connection port configuration before ordering to match the intended circuit
• Review dead space of 34 mL when comparing options for your setup

FAQ

• What type of product is this? This is an HME with filter for respiratory care use.
• What are the connection sizes? The connection ports are 15 mm F/22 mm M and 15 mm M/22 mm F.
• What is the moisture output? Moisture output is 27 mg H2O/l at a tidal volume of 750 ml.
• What is the airflow resistance? Resistance is 0.06 kPa, or 0.6 cm H2O, at 30 LPM.
• How often should the HME with filter be changed? For ICU use, change it every 24 hours. In the OR, change it after every patient.

From AirLife HMEF 750/S by Vyaire Medical.