Fabrication Enterprises Adc Adview 2 Diagnostic Station, W/ Blood Pressure And Pulse Oximetry Modules

Adc Adview 2 Diagnostic Station, W/ Blood Pressure And Pulse Oximetry Modules

The ADC ADView 2 diagnostic station is a vital signs device with blood pressure and pulse oximetry modules. It fits clinics and other care settings that want automatic non-invasive blood pressure measurement, optional manual auscultatory readings, and oxygen saturation checks from one station. Buyers may also appreciate the customizable averaging protocol and the reusable finger clip sensor with an 8 foot cable.

Good Fit For

• Vital signs workflows that combine blood pressure and pulse oximetry
• Settings that want both automatic and manual blood pressure capture
• Patients with complex needs where manual auscultatory readings may be preferred

Key Features

• Automatic non-invasive blood pressure measurement starts with the push of a button
• Uses the oscillometric method and shows pulse rate plus mean arterial blood pressure in about 30 seconds
• Manual mode supports traditional auscultatory blood pressure readings with a stethoscope without changing cuffs
• Customizable averaging protocol can average 2 to 5 blood pressure readings for accuracy
• ChipOX Nellcor-compatible SpO2 module measures oxygen saturation in about 10 seconds
• Pulse oximetry module includes a reusable finger clip sensor and 8 foot cable

Applications and Usage

• Capture non-invasive blood pressure at the push of a button
• Check pulse rate and mean arterial blood pressure during routine vitals
• Switch to manual auscultatory blood pressure measurement with a stethoscope without changing cuffs
• Average 2 to 5 blood pressure readings when a multi-reading protocol is preferred
• Measure oxygen saturation and view pulse rate signal strength with the SpO2 module

Packaging and Handling

• Packaging: EA.
• Size: 8 foot.
• Manual blood pressure mode uses a stethoscope for auscultatory measurement
• The pulse oximetry module uses a reusable finger clip sensor rather than a single-use sensor
• The included sensor cable length is 8 foot, which may matter for room setup and patient positioning

FAQ

• Can this diagnostic station take blood pressure automatically? Yes. The ADC ADView 2 captures blood pressure automatically using a non-invasive oscillometric method with the push of a button.
• Does the unit also support manual blood pressure readings? Yes. A manual mode allows traditional auscultatory blood pressure measurement with a stethoscope, and it does not require changing cuffs.
• What readings does the blood pressure module display? The blood pressure module can display pulse rate and mean arterial blood pressure, with results available in about 30 seconds.
• Does this model include pulse oximetry? Yes. This configuration includes a ChipOX Nellcor-compatible SpO2 module that measures oxygen saturation of arterial blood flow in about 10 seconds.
• What comes with the SpO2 module? The pulse oximetry module comes with a reusable finger clip sensor and an 8 foot cable.

From ADC by Fabrication Enterprises.